YKX block-type round hole type graphite falling film absorber
【Structure and characteristics】
Heat transfer equipment used in this unit block stacking structure, the use of PTFE between the heat exchanger block "O"-rings or expansion of PTFE (PTFE flexible rope) sealed the overall installation of the pressure spring device for automatic compensationinstitutions. YKA yen compared with the block-hole heat exchanger, the equipment section at the top of the installation of tower, installation of gas-liquid separator at the bottom, structure and principles and out-tube graphite falling film absorber similar.
YKX block-type round hole type graphite falling film absorber film-making (or said: the first sub-solution, the distribution of cup, the overflow tube) using high-density, high purity, high-intensity "three high" caused by high-performance graphite system distribution, so the effect of this device has a good film, production intensity, but also with structural strength, and good thermal shock, heat transfer efficiency, easy maintenance. Is a superior performance of gas absorption equipment.
【Technical characteristics】
Design pressure: tube: <0.1MPa
Shell side: 0.4MPa
Design temperature: tube: Intake Air Temperature <170 ℃
Shell side: -20 ℃ ~ 60 ℃
Heat transfer area: 1 ~ 120 m² can be established in accordance with user needs, creating large-scale tube-type falling film absorber.
The implementation of standards: reference HG/T3188-2000 "shell-and-tube graphite ink absorber down"
【The main advantage】
1) graphite cell block design, the block was damaged the rapid replacement of
2) the use of gaskets between the graphite block, no adhesive, demolition, equipment is simple, easy maintenance
3) Add a graphite block heat exchanger to increase the size of
4) impact resistance and strong
5) The effective absorption
【Uses】
This series of products are generally used as HCl, SO₂, NH₃, P₂O₅, H₂S gas absorption.

 

管口尺寸表

型号		规格 m2	a.e管		b.c管 DN	f.g管 DN	d管		h管
			D1	D2			D3	D4	D5	D6
YKX	300	3	50	140	500	20	125	240	65	165
		5
	400	10	65	165	50	20	150	290	75	180
		12
	500	15	75	180	70	20	200	335	102	215
		20
	600	25	100	210	80	20	250	400	125	240
		30
	700	40	150	260	100	20	300	420	175	290
		45
		50
	800	55	175	285	100	20	350	450	200	215
		60
		65

安装尺寸表

型号		规格 m2		安装尺寸									支座
			H	H1	H2	H3	H4	L1	L2	L3	L4	L5	φA	n
YKX	300	3	2580	265	2030	395	170	285	290	320	305	310	320	6
		5	3024		2474
	400	10	3095	302	2498	405	180	335	340	370	355	360	420	6
		12	3534		2937
	500	15	3307	349	2569	468	224	390	390	420	410	415	520	8
		20	4198		3460
	600	25	3655	382	2740	1836	280	450	445	475	475	480	620	10
		30	4170		3225	2354
		35	4685		3770	2872
YKX	700	40	4230	435	3315	2419	350	480	460	535	535	540	720	10
		45	4460		3531	2641
		50	4680		3759	2863
	800	55	4460	460	3537	2641	380	480	460	595	595	600	820	12
		60	4680		3759	2863
		75	4900		3981	3085

注：亦可制造75-250m²的大型规格圆块孔降膜吸收器。